Roof Replacement · Wilmette, IL
Roof Replacement in
Wilmette, IL
When an aging roof — architectural shingle or premium slate, tile, and copper — reaches the end of its life, a full replacement done once protects the home for decades. Complete tear-off and a deck-up rebuild by an Arlington Heights owner who’s on every job. Serving Wilmette since 2007.
- Local to the NW suburbs — based minutes away in Arlington Heights
- 5.0★ Google rating from verified customers
- Manufacturer material warranty + our own workmanship warranty
- Licensed, bonded & insured in Illinois
What's Included
What a Complete Roof Replacement Includes
A real replacement isn’t new shingles laid over old problems. We strip the roof down to the deck, inspect and repair the structure underneath, and rebuild the whole system — so you’re not paying to bury rot, bad ventilation, or failed flashing for the next crew to find.
Full tear-off and haul-away of the existing roof
Deck inspection & replacement of rotted or damaged sheathing
Ice-and-water shield at eaves, valleys & every penetration
Synthetic underlayment across the entire roof
New flashing, drip edge & in-house-fabricated metal details
Properly sized intake/exhaust ventilation (ridge vent)
Your chosen roofing material, installed to manufacturer spec
Full cleanup with magnetic nail sweep & debris haul-away
Materials
Roofing Materials We Install
From architectural asphalt to premium metal, slate, and cedar, we install and fabricate the full range — and we’ll help you weigh cost, lifespan, and the look that fits your home and block.
- Architectural & dimensional asphalt
- Standing-seam & custom metal
- Natural & synthetic slate
- Cedar shake
- Clay tile
- Flat / low-slope membrane (TPO, PVC, mod-bit)
- Copper & architectural metal accents
Local Context
Why Wilmette Roofs Reach Replacement
Wilmette is an established North Shore suburb of older Colonials, Tudors, and bungalows near the lake, with roofs that range from aging architectural shingle to slate, tile, and copper on the larger homes. The older stock is now on its second or third roof; the premium materials on the bigger homes, once flashing and valleys fail across the roof, warrant a full replacement in kind. Mature parkway trees and lakefront weather — ice dams, freeze-thaw, wind-driven rain, and hail — push every type toward the same end. We replace the whole system, matched to the home.
- Older Colonials, Tudors, and bungalows on aging asphalt, plus slate/tile on larger homes
- Mature parkway trees dropping limbs and debris into tired valleys
- Lakefront North Shore exposure: ice dams, freeze-thaw, wind, and hail
Not an emergency leak? See roof repair in Wilmette instead.
Repair or Replace?
Signs It's Time to Replace, Not Repair
You’re paying to repair the same roof again and again
Multiple active leaks, or sagging/soft spots in the roof deck
Storm or hail damage your insurer has declared a total loss
You’re selling and the roof is a flagged item on inspection
Why Black Square
Why Wilmette Homeowners Choose Black Square Roofing
We Fabricate Our Own Metal Details
No Upsells — Honest Repair-vs-Replace
Manufacturer + Workmanship Warranty
Owner on Every Job
Mark is on-site overseeing the tear-off and install — not managing from an office.
The Process
How a Roof Replacement Works
1
In-Home Consultation & Estimate
We inspect the roof and attic, talk through your goals and timeline, and give you a detailed written estimate. No pressure, no hidden costs.
2
Material Selection
We help you choose the right material, color, and warranty tier for your home and budget — and order it in.
3
Tear-Off & Deck Inspection
We strip the old roof, inspect the deck, and repair any rot or damage before anything new goes down.
4
System Installation
Underlayment, ice-and-water shield, flashing, ventilation, and your new roofing material, installed to manufacturer spec.
5
Final Walkthrough & Warranty
Owner-led final check, magnetic nail sweep, full cleanup, and your warranty documentation in hand.
Service Area
Serving Wilmette & the Surrounding Suburbs
Based in Arlington Heights, we install new roofs across Wilmette and the neighboring North Shore communities. Not sure if we reach you? Call — we likely do.
Wilmette
Kenilworth
Winnetka
Glenview
Evanston
Skokie
Northfield
Glencoe
Northbrook
FAQ
Common Questions
How long does a roof replacement take in Wilmette?
A standard asphalt roof is often a 1–3 day job; slate, tile, and copper on the larger homes take longer to do right. We give you a realistic timeline with your estimate.
Do you replace slate, tile, and copper roofs in Wilmette?
Yes — full-system replacement of premium materials is where our in-house fabrication matters most. We match slate, tile, and copper and cut flashing and metal details to fit the roofline, not force off-the-shelf parts.
Will you tear off the old roof or install over it?
We tear off. Laying a new roof over old shingles hides deck rot and bad flashing, voids most manufacturer warranties, and never lasts like a full replacement. Stripping to the deck is the only way to do it right.
Do you handle storm and insurance replacement claims?
Yes. We inspect, document the damage with photos, and provide the detailed written estimate your insurer needs — working off the actual damage, not a sales pitch.
What warranty comes with a new roof?
Your new roof carries the material manufacturer’s warranty plus our own workmanship warranty on the install. We spell out both in writing before we start.
Plan Your Wilmette Roof Replacement
No pressure — just an honest assessment of whether it’s time, what your options are, and what it takes to do it right, from an owner who’s been doing this since 2007.