Roof Replacement · Glencoe, IL

Roof Replacement in
Glencoe, IL

When a slate, tile, or copper roof reaches the end of its life, a full-system replacement protects an architect-designed home for generations. Complete tear-off and a deck-up rebuild by an Arlington Heights owner who’s on every job. Serving Glencoe since 2007.

What's Included

What a Complete Roof Replacement Includes

A real replacement isn’t new shingles laid over old problems. We strip the roof down to the deck, inspect and repair the structure underneath, and rebuild the whole system — so you’re not paying to bury rot, bad ventilation, or failed flashing for the next crew to find.

Full tear-off and haul-away of the existing roof

Deck inspection & replacement of rotted or damaged sheathing

Ice-and-water shield at eaves, valleys & every penetration

Synthetic underlayment across the entire roof

New flashing, drip edge & in-house-fabricated metal details

Properly sized intake/exhaust ventilation (ridge vent)

Your chosen roofing material, installed to manufacturer spec

Full cleanup with magnetic nail sweep & debris haul-away

Materials

Roofing Materials We Install

From architectural asphalt to premium metal, slate, and cedar, we install and fabricate the full range — and we’ll help you weigh cost, lifespan, and the look that fits your home and block.

Local Context

Why Glencoe Roofs Reach Replacement

Glencoe is a small, affluent North Shore village of older architect-designed homes — many roofed in slate, tile, cedar, and copper on steep, detailed rooflines, set among heavy tree cover and ravine lots near the lake. These premium systems are built to last, but once specialty materials and ornate flashing have aged past repair across the roof, a full replacement in matching materials is the honest call. Lakefront weather — ice dams, freeze-thaw, wind, and hail — finds every weak point. Replacing these means matching the original materials and fabricating metalwork to fit, which we do in-house.

Not an emergency leak? See roof repair in Glencoe instead.

Repair or Replace?

Signs It's Time to Replace, Not Repair

Your roof is 20+ years old, or past its material’s rated lifespan

You’re paying to repair the same roof again and again

Widespread curling, cracking, or bald, granule-stripped shingles

Multiple active leaks, or sagging/soft spots in the roof deck

Storm or hail damage your insurer has declared a total loss

You’re selling and the roof is a flagged item on inspection

Why Black Square

Why Glencoe Homeowners Choose Black Square Roofing

We Fabricate Our Own Metal Details

Flashings, valleys, drip edge, and copper, made in-house and cut to fit your roof — not generic off-the-shelf parts on a roof meant to last decades.

No Upsells — Honest Repair-vs-Replace

If your roof has years left, we’ll tell you and repair it. We only recommend replacement when it’s genuinely the better value. Your budget is respected.

Manufacturer + Workmanship Warranty

Your new roof is backed by the material manufacturer’s warranty and our own workmanship guarantee on the install.

Owner on Every Job

Mark is on-site overseeing the tear-off and install — not managing from an office.

The Process

How a Roof Replacement Works

1

In-Home Consultation & Estimate

We inspect the roof and attic, talk through your goals and timeline, and give you a detailed written estimate. No pressure, no hidden costs.

2

Material Selection

We help you choose the right material, color, and warranty tier for your home and budget — and order it in.

3

Tear-Off & Deck Inspection

We strip the old roof, inspect the deck, and repair any rot or damage before anything new goes down.

4

System Installation

Underlayment, ice-and-water shield, flashing, ventilation, and your new roofing material, installed to manufacturer spec.

5

Final Walkthrough & Warranty

Owner-led final check, magnetic nail sweep, full cleanup, and your warranty documentation in hand.

Service Area

Serving Glencoe & the Surrounding Suburbs

Based in Arlington Heights, we install new roofs across Glencoe and the neighboring North Shore villages. Not sure if we reach you? Call — we likely do.

Glencoe

Winnetka

Highland Park

Northfield

Northbrook

Kenilworth

Wilmette

Glenview

Deerfield

FAQ

Common Questions

Do you replace slate, tile, and copper roofs in Glencoe?

Yes — full-system replacement of premium materials is where our in-house fabrication matters most. We replace slate, tile, cedar, and copper and cut flashing and metal details to fit the roofline, not force off-the-shelf parts.

A standard asphalt roof is often a 1–3 day job, but slate, tile, copper, and ravine-lot estates take longer to do right. We give you a realistic timeline with your estimate.

We tear off. On these homes especially, laying new over old buries deck and structural problems and never lasts. We strip to the deck, inspect the structure, and rebuild the system.

Yes. We match the original material and profile — slate, tile, cedar, or copper — and fabricate the metal details in-house so the new roof reads as right for the architecture, not generic.

Your new roof carries the material manufacturer’s warranty plus our own workmanship warranty on the install. We spell out both in writing before we start.

Plan Your Glencoe Roof Replacement

No pressure — just an honest assessment of whether it’s time, what your options are, and what it takes to do it right, from an owner who’s been doing this since 2007.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.